mitsubishi plc

CONTACT US

<<< PLC types

FX-2N Compact PLC

General Specifications:
Ambient temperature [°C]	0-55
Operating temperature [°C]	0-55
Storage temperature [°C]	-20...+70
Service power supply	24 V DC, 400 mA (FX1N); 250/460 mA (FX2N/FX2NC) ripple ratio at maximum load:=±5%
Protection	IP 20
Noise durability	1000 Vpp with noise generator; 1 ms at 30 – 100 Hz
Dielectric withstand voltage	1,500 V AC, 1min.
Ambient relative humidity	35 - 85%
Shock resistance	FX2N/FX2NC: 2 G (resistance to vibrations from 10 – 55 Hz for 2 hours along all 3 axes; 0.5 G for DIN railmounting
Vibration resistance	Acc. to IEC 68-2-6 (1 G: resistance to vibrations from 57 – 150 Hz for 80 minutes along all 3 axes; 0.5 G for DIN railmounting
Insulation resistance	500V DC, 5MOhm
Ground	Class 3
Fuse	Up to FX1N-24: 1 A; from FX1N-40: 3 A; from FX2N-32: 3.15 A; fromFX2N-48: 5 A; FX2NC-16MR-T-DS: 2.5 A; FX2NC-MT-DSS: 3.15
Environment	Avoid environments containing corrosive gases, install in a dust-free location.
Certifications	UL/CSA/CE/LR/DNV/GL/RINA; ECE
System specifications:
Program data:
I/O points (addresses)	256
Address range	Max. 248 inputs X0–X367, max. 248 outputs Y0–Y367
Program memory	8,000 steps RAM (internal), 4,000 steps EPROM/EEPROM cassettes (optional), 16,000 steps RAM cassettes (optional), 16,000 steps EEPROM cassettes (optional)
Cycle period	0.08 µs / logical instruction
Programming language	Step ladder, instruction list, SFC
Program execution	Cyclical execution, refresh mode processing
Program protection	Password protection with 3 protection levels
Number of instructions	27 sequence instructions, 2 step ladder instructions, 18 verify instructions, 107 applied instructions
Operands:
Internal relays	3072
Special relays	256 (M8000-M8255)
Step ladder	1000
Timer	256
Ext. preset value via potentiometer	-
Counter	235 ; C0-C199 (16 bit), C200-C219 (32 bit)
High-speed counter	6 single phase inputs (max. 60 kHz), 2 double phase inputs (max. 30 kHz)
Real-time clock	Year,month, day, hour, minut, second, weekday (FX2NC optionally)
Data register	8000 (D0-D7999)
File register	Max . 7,000 (parameter editable), Total registers=8,000
Index register	16
Special register	256 (16 bit) (D8000-D8255)
Pointer	128 (P0-P127)
Nestings	8 (N0-N7)
Interrupt inputs	6
Constants	16 bit: K: -32,768...+32,767; hex: 0...FFFF
	32 bit: K: -2,147,483,648...+2,147,483,647; hex: 0...FFFF FFFF
	32 bit lebegopontos: 0; ±1,175 x 10^-38.....±3.403 x 10^-38

Specifications:		FX-2N 16MR-DS	FX-2N 16MR-ES-UL	FX-2N 16MT-DSS	FX-2N 16MT-ESS-UL	FX-2N 32MR-DS	FX-2N 32MR-ES-UL	FX-2N 32MT-DSS	FX-2N 32MT-ESS-UL
Electrical data:
Integrated inputs/outputs		16	16	16	16	32	32	32	32
Power supply	AC (+10%, -15%)	-	100-240 V AC	-	100-240 V AC	-	100-240 V AC	-	100-240 V AC
	Frequency at AC [Hz]	-	50-60 (± 10%)	-	50-60 (± 10%)	-	50-60 (± 10%)	-	50-60 (± 10%)
	DC (+20%, -30%)	24V DC	-	24V DC	-	24V DC	-	24V DC	-
Max. input apparent power		25W	30VA	25W	30VA	25W	40VA	25W	40VA
Inrush current at ON[A]	100V AC	-	40A<5 ms	-	40A<5 ms	-	40A<5 ms	-	40A<5 ms
Inrush current at ON[A]	200V AC	-	60A<5 ms	-	60A<5 ms	-	60A<5 ms	-	60A<5 ms
Allowable momentary power failure time [ms]		5	10	5	10	5	10	5	10
External service power supply (24V DC) [mA]		-	250	-	250	-	250	-	250
Power supply int. bus (5V DC) [mA]		290	290	290	290	290	290	290	290
Inputs:
Integrated inputs		8	8	8	8	16	16	16	16
Input current [mA] X0...X7 / X10...X**		7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5
Min. current for logical 1 [mA] X0...X7 / X10...X**		4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5
Max. current for logical 0 [mA]		1,5	1,5	1,5	1,5	1,5	1,5	1,5	1,5
Isolation [ms]		Photocoupler isolation between input terminals and PC power for all base units.
Response time		For all base units of the MELSEC FX2N series: 10 ms (at time of shipment), partly adjustable between 0 and 15 ms (REFF, FNC51=0 – 60 ms)
Outputs:
Integrated outputs		8	8	8	8	16	16	16	16
Output type		Relay	Relay	Tranz.	Tranz.	Relay	Relay	Tranz.	Tranz.
ON voltage (max.)		Generally for relay version:<250 V AC,<30 V DC; for transistor version: 5 – 30 V DC
Max. output current [A] = at Y0 and Y1 : 0,3A *=0,8A for four, 1,6A for eight groups	- per output	2	2	0,5 *	0,5 *	2	2	0,5 *	0,5 *
	- per group*	8	8	0,8 **	0,8 **	8	8	0,8 **	0,8 **
Max. switching power[A]	- inductive load	80VA	80VA	12W	12W	80VA	80VA	12W	12W
Max. switching power[A]	- lamp load	100W	100W	1,5W	1,5W	100W	100W	1,5W	1,5W
Response time [ms]		10	10	<0,2	<0,2	10	<0,2	<0,2	<0,2
Life of contacts (switching times)		For all base units of the MELSEC FX2N series: 3,000,000 at 20 VA; 1,000,000 at 35 VA; 200,000 at 80 VA
Mechanical data:
Weight [kg]		0,6	0,6	0,6	0,6	0,65	0,65	0,65	0,65
Dimensions (Wx H x D) [mm]		130 x 90 x 87	130 x 90 x 87	130 x 90 x 87	130 x 90 x 87	150 x 90 x 87	150 x 90 x 87	150 x 90 x 87	150 x 90 x 87

Base Units

Specifications:		FX-2N 48MR-DS	FX-2N 48MR-ES-UL	FX-2N 48MT-DSS	FX-2N 48MT-ESS-UL	FX-2N 64MR-DS	FX-2N 64MR-ES-UL	FX-2N 64MT-DSS	FX-2N 64MT-ESS-UL
Electrical data:
Integrated inputs/outputs		48	48	48	48	64	64	64	64
Power supply	AC (+10%, -15%)	-	100-240 V AC	-	100-240 V AC	-	100-240 V AC	-	100-240 V AC
	Frequency at AC [Hz]	-	50-60 (± 10%)	-	50-60 (± 10%)	-	50-60 (± 10%)	-	50-60 (± 10%)
	DC (+20%, -30%)	24V DC	-	24V DC	-	24V DC	-	24V DC	-
Max. input apparent power		30W	50VA	30W	50VA	35W	60VA	35W	60VA
Inrush current at ON [A]	100V AC	-	40A<5 ms	-	40A<5 ms	-	40A<5 ms	-	40A<5 ms
Inrush current at ON [A]	200V AC	-	60A<5 ms	-	60A<5 ms	-	60A<5 ms	-	60A<5 ms
Allowable momentary power failure time [ms]		5	10	5	10	5	10	5	10
External service power supply. (24V DC) [mA]		-	460	-	460	-	460	-	460
Power supply int. bus (5V DC) [mA]		290	290	290	290	290	290	290	290
Inputs:
Integrated inputs		24	24	24	24	32	32	32	32
Input current [mA] X0...X7 / X10...X**		7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5
Min. current for logical 1 [mA] X0...X7 / X10...X**		4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5
Max. current for logical 0 [mA]		1,5	1,5	1,5	1,5	1,5	1,5	1,5	1,5
Response time [ms]		For all base units of the MELSEC FX2N series: 10 ms (at time of shipment), partly adjustable between 0 and 15 ms (REFF, FNC51=0 – 60 ms)
Isolation		Photocoupler isolation between input terminals and PC power for all base units.
Outputs:
Integrated outputs		24	24	24	24	32	32	32	32
Output type		Relay	Relay	Tranz.	Tranz.	Relay	Relay	Tranz.	Tranz.
ON voltage (max.)		Generally for relay version:<250 V AC,<30 V DC; for transistor version: 5 – 30 V DC
Max. output current [A]	- per output	2	2	0,5 *	0,5 *	2	2	0,5 *	0,5 *
Max. output current [A]	- per group*	8	8	0,8 **	0,8 **	8	8	0,8 **	0,8 **
Max. switching power [A]	- inductive loadl	80VA	80VA	12W	12W	80VA	80VA	12W	12W
Max. switching power [A]	- lamp load	100W	100W	1,5W	1,5W	100W	100W	1,5W	1,5W
Response time [ms]		10	10	<0,2	<0,2	10	10	<0,2	<0,2
Life of contacts (switching times)		For all base units of theMELSEC FX2N series: 3,000,000 at 20 VA; 1,000,000 at 35 VA; 200,000 at 80 VA
Mechanical data:
Weight [kg]		0,85	0,85	0,85	0,85	1,0	1,0	1,0	1,0
Dimensions (Wx H x D) [mm]		182 x 90 x 87	182 x 90 x 87	182 x 90 x 87	182 x 90 x 87	220 x 90 x 87	220 x 90 x 87	220 x 90 x 87	220 x 90 x 87

Base Units

Specifications:		FX-2N 80MR-DS	FX-2N 80MR-ES-UL	FX-2N 80MT-DSS	FX-2N 80MT-ESS-UL	FX-2N 128MR-ES-UL	FX-2N 128MT-ESS-UL
Electrical data
Integrated inputs/outputs		80	80	80	80	128	128
Power supply	AC (+10%, -15%)	-	100-240 V AC	-	100-240 V AC	100-240 V AC	100-240 V AC
	Frequency at AC [Hz]	-	50-60 (± 10%)	-	50-60 (± 10%)	-	50-60 (± 10%)
	DC (+20%, -30%)	24V DC	-	24V DC	-	-	-
Max. input apparent power		40W	70VA	40W	70VA	100VA	100VA
Inrush current at ONl [A]	100V AC	-	40A<5 ms	-	40A<5 ms	50A<7 ms	50A<7 ms
Inrush current at ONl [A]	200V AC	-	60A<5 ms	-	60A<5 ms	70A<7 ms	70A<7 ms
Allowablemomentary power failure time [ms]		5	10	5	10	10	10
External service power supply. (24V DC) [mA]		-	460	-	460	460	460
Power supply int. bus (5V DC) [mA]		290	290	290	290	290	290
Inputs:
Integrated inputs		40	40	40	40	64	64
Input current [mA] X0...X7 / X10...X**		7 / 5	7 / 5	7 / 5	7 / 5	7 / 5	7 / 5
Min. current for logical 1 [mA] X0...X7 / X10...X**		4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5	4,5 / 3,5
Max. current for logical 0 [mA]		1,5	1,5	1,5	1,5	1,5	1,5
Response time [ms]		For all base units of theMELSEC FX2N series: 10 ms (at time of shipment), partly adjustable between 0 and 15 ms (REFF, FNC51=0 – 60 ms)
Isolation		Photocoupler isolation between input terminals and PC power for all base units.
Outputs:
Integrated outputs		40	40	40	40	64	64
Output type		Relay	Relay	Tranz.	Tranz.	Relay	Tranz.
ON voltage (max.)		Generally for relay version:<250 V AC,<30 V DC; for transistor version: 5 – 30 V DC
Max. output current [A]	- per output	2	2	0,5 *	0,5 *	2	0,5 *
Max. output current [A]	- per group*	8	8	0,8 **	0,8 **	8	0,8 **
Max. switching power [A]	- inductive load	80VA	80VA	12W	12W	80VA	12W
Max. switching power [A]	- lamp load	100W	100W	1,5W	1,5W	100W	1,5W
Response time [ms]		10	10	<0,2	<0,2	10	<0,2
Life of contacts (switching times)		For all base units of the MELSEC FX2N series: 3,000,000 at 20 VA; 1,000,000 at 35 VA; 200,000 at 80 VA
Mechanical data:
Weight [kg]		1,2	1,2	1,2	1,2	1,8	1,8
Dimensions (Wx H x D) [mm]		285 x 90 x 87	285 x 90 x 87	285 x 90 x 87	285 x 90 x 87	350 x 90 x 87	350 x 90 x 87

Axicont Ltd is the authorised Distributor for Mitsubishi Electric products in Hungary.

AxiCont Kft.
Reitter F. u. 132 - C Building.
1131, Budapest, Hungary
Tel.: (+36-1) 412 0882
Fax: (+36-1) 412 0883
E-Mail: office@axicont.hu

FX-2N Compact PLC

Specifications:

Base Units

Specifications:

Base Units

Specifications: